Maintenance and Specifications
WINDSHIELD WASHER FLUID
Add fluid to fill the reservoir if the
level is low. In very cold weather, do
not fill the reservoir completely.
Only use a washer fluid that meets Ford specification WSB-M8B16–A2.
Refer toLubricantspecifications in theCapacitiesandspecifications
chapter.
State or local regulations on volatile organic compounds may restrict the
use of methanol, a common windshield washer antifreeze additive.
Washer fluids containing non-methanol antifreeze agents should be used
only if they provide cold weather protection without damaging the
vehicle’s paint finish, wiper blades or washer system.
If you operate your vehicle in temperatures below 4.5° C (40°
F), use washer fluid with antifreeze protection. Failure to use
washer fluid with antifreeze protection in cold weather could result in
impaired windshield vision and increase the risk of injury or accident.
Donotputwasherfluidintheenginecoolantreservoir.Washer
fluidplacedinthecoolingsystemmayharmengineandcooling
systemcomponents.
Checking and adding washer fluid for the liftgate
Washer fluid for the liftgate is supplied by the same reservoir as the
windshield.
ENGINE OIL
Checking the engine oil
Refer to the scheduled maintenance guide for the appropriate intervals
for checking the engine oil.
1.
2.
Make sure the vehicle is on level ground.
Turn the engine off and wait a few minutes for the oil to drain into the
oil pan.
226
2003
Explorer(exp)
OwnersGuide(post-2002-fmt)
USAEnglish(fus)
| Categories | Ford Explorer Manuals, Ford Manuals |
|---|---|
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2003 Ford Explorer Owners Manual 4.0 out of 4.0 based on 1 product reviews.