Locks and Security
•
•
The factory set code will work even if you have set your own personal
code.
If you set a second personal code it will erase your first personal code.
Erasing personal code
1.
2.
Enter the factory set 5–digit code.
Press and hold the 1• 2 for two seconds. This must be done within
five seconds of completing step 1.
Your personal code is now erased and only the factory set 5–digit code
will work.
Anti-scan feature
If the wrong code has been entered 7 times (35 consecutive button
presses), the keypad will go into an anti-scan mode. This mode disables
the keypad for one minute and the keypad lamp will flash.
The anti-scan feature will turn off after:
•
•
•
•
one minute of keypad inactivity.
pressing the UNLOCK
control on the remote entry transmitter.
the ignition is turned to the ON position.
a key turned to the UNLOCK
vehicle is equipped with a perimeter anti-theft system).
position on the driver’s door (if the
Unlocking and locking the doors, liftgate and liftgate window using
keyless entry
Tounlockthedriver’sdoor, enter the factory set 5-digit code or your
personal code. Each number must be pressed within five seconds of each
other. The interior lamps will illuminate.
Toseconds.unlockalldoorsandliftgate, press the 3• 4 control within five
Toseconds.opentheliftgatewindow, press the 5• 6 control within five
Tolockalldoors,liftgateandliftgatewindow, press the 7• 8 and
the 9• 0 at the same time.Note: The driver’s door must be closed. You
donot need to enter the keypad code first.
Autolock
This feature will automatically lock all the doors when:
•
all the doors are closed,
88
2003
Explorer(exp)
OwnersGuide(post-2002-fmt)
USAEnglish(fus)
| Categories | Ford Explorer Manuals, Ford Manuals |
|---|---|
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2003 Ford Explorer Owners Manual 4.0 out of 4.0 based on 1 product reviews.