Driver Controls
3.
Locate compass sensor mounted
at base of mirror.
4.
Press the button on the top of
the compass module until ZONE
appears in the instrument cluster
display.
5.
6.
Release pressure on the button and then slowly press it down again.
Continue to press until ZONE
appears in the instrument cluster
display, then release. The display
should show the current zone
number.
7.
number appears. The display will flash and then return to normal
operation. The zone is now updated.
Press until the desired zone
Compass calibration adjustment
Perform this adjustment in an open area free from steel structures and
high voltage lines:
For optimum calibration, turn off all electrical accessories (heater/air
conditioning, wipers, etc.) and make sure all vehicle doors are shut.
1.
2.
3.
the compass module until ZONE
appears in the instrument cluster
display. Continue to hold down until
ZONE disappears and CAL is
displayed (approximately eight
seconds) and release.
Start the vehicle.
Locate compass sensor mounted at base of mirror.
Press the button on the top of
4.
Drive the vehicle slowly (less than 5 km/h [3 mph]) in circles until
CAL indicator turns off (4–5 complete circles).
5.
The compass is now calibrated.
65
2003
Explorer(exp)
OwnersGuide(post-2002-fmt)
USAEnglish(fus)
| Categories | Ford Explorer Manuals, Ford Manuals |
|---|---|
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2003 Ford Explorer Owners Manual 4.0 out of 4.0 based on 1 product reviews.