Lights
Move the control to the full down position (past detent) to prevent
interior lamps from illuminating when the doors are opened.
AIMING THE HEADLAMPS
The headlamps on your vehicle are properly aimed before leaving the
assembly plant. If your vehicle is involved in an accident or if you have
problems fixing the alignment of your headlamps, have them checked by
a qualified service technician.
Headlamp aim adjustment
The headlamps on your vehicle can only be vertically adjusted. Your
vehicle does not require horizontal aim adjustments.
To adjust the headlamps:
1.
Park your vehicle on a level
surface about 7.6 meters (25 feet)
away from a vertical plain surface
(3).
Check your headlamp alignment
at night or in a dark area so that
you can see the headlamp beam
pattern.
•
•
(1) Eight feet
(2) Center height of lamp to
ground
•
•
2.
the height from the center of your headlamp to the ground (2) and mark
a 2.4 meter (8 foot) long horizontal line on the plain surface (1) at this
height (masking tape works well).
(3) Twenty-five feet
(4) Horizontal reference line
The center of the headlamp has a 3.0 mm circle on the lens. Measure
3.
Turn on the low beam headlamps.
The brightest part of the light
should be below the horizontal line
(4).
If it is above the line the
headlamp will need to be adjusted.
4.
Open the hood.
39
2003
Explorer(exp)
OwnersGuide(post-2002-fmt)
USAEnglish(fus)
| Categories | Ford Explorer Manuals, Ford Manuals |
|---|---|
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2003 Ford Explorer Owners Manual 4.0 out of 4.0 based on 1 product reviews.