DO-IT-YOURSELFMAINTENANCE 6-9
Iftheoillevelisclosetoorbelowthe"L"
mark, add oil until it reaches the "F"
mark. To add oil:
o Engine oil is used to lubricate pis-
tons, piston rings and cylinders.
A thin film of oil is left on the cylinder
wall when a piston moves down-
wards in the cylinder. High negative
pressure generated during engine
operation sucks some of the oil into
the combustion chamber.
This oil with some oil of the cylinder
wall is burned by the high tempera-
ture combustion gases during the
combustion process.
o The engine oil consumption is
strongly effected by the viscosity
and quality of oil, engine rpm and
driving condition etc. The engine oil
is more consumed under severe
driving conditions such as high
speeds and frequent acceleration
and deceleration than normal driv-
ing condition.
G040A04A-AAT
CHANGING THE OIL AND FIL-
TER (Gasoline Engine/ Diesel
Engine : Left hand drive
type(Except E.C), Right hand
drive type)
1
2
3
. Removetheoilfillercapbyturningit
counterclockwise.
. Add oil, then check the level again.
Do not overfill.
. Replace the cap by turning it clock-
wise.
1
.1L
Oil filler cap
The distance between the "F" and "L"
marksisequaltoabout1liter(Gasoline
Engine)/1.2 liter(Diesel Engine) of oil.
Oil filter
G350A01A-GAT
ENGINE OIL CONSUMPTION
Function of Engine Oil
Drain plug
F040A01TB
1.3L
Oil filler cap
Engine oil has the primary function of
lubricatingandcoolingtheinsideofthe
engine.
Engine oil consumption
It is normal that an engine should
consume some engine oil while nor-
mal driving.Thecauseofoilconsump-
tion in a normal engine are as follows;
Oil filter
Drain plug
HTB222
Product Specification
Categories | Hyundai Manuals, Hyundai Getz Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Getz |
Document File Type | |
Copyright | Attribution Non-commercial |