DO-IT-YOURSELFMAINTENANCE 6-27
Horizontal Aiming
!
Vertical
Aiming
WARNING:
Be sure to carefully wipe away any
water drained out in this manner,
because the fuel mixed in the water
might be ignited and result in a fire.
G290A01FC-EAT
HEADLIGHT AIMING ADJUST-
MENT
G300B01FC
HTB269
1
2
. Remove the engine cover.
5. Openthebonnet.
6.
. Disconnect the air intake hose from
air cleaner cover.
. Loosen the drain plug at the bottom
of the fuel filter.
. Tightenthedrainplugwhenwaterno
longer comes out.
. Check to be sure that the warning
lamp illuminates when the ignition
key is turned to "ON", and that it
goes off when the engine is started.
If in doubt, consult your nearest au-
thorizedHYUNDAIdealer.
Before performing aiming adjustment,
make sure of the following.
Draw the vertical line (through the
center of each headlight beam pat-
tern)andthehorizontalline(through
the center of each headlight beam
pattern) on the aiming screen.
3
4
5
1. Keep all tires inflated to the correct
pressure.
2. Place the vehicle on level ground
andpressthefrontbumperandrear
bumper down several times. Place
the vehicle at a distance of 118 in.
(3,000 mm) from the test wall.
3. See that the vehicle is unloaded
(except for full levels of coolant,
engine oil and fuel, and spare tire,
jack, and tools).
And then, draw the horizontal paral-
lel line at 1.18 in. (30 mm ) under the
horizontalline.
7.
8.
Adjust each cut-off line of the low
beamtotheparallellinewithaphillips
screwdriver - VERTICAL AIMING.
Adjust each cut-off line of the low
beam to each vertical line with a
phillipsscrewdriver-HORIZONTAL
AIMING.
4.
Clean the head lights lens and turn
on the headlight (low beam).
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)