DO-IT-YOURSELFMAINTENANCE 6-31
Horizontal Aiming
!
Vertical
Aiming
WARNING:
Be sure to carefully wipe away any
water drained out in this manner,
because the fuel mixed in the water
might be ignited and result in a fire.
G290A01FC-GAT
HEADLIGHT AIMING ADJUST-
MENT
G300B01FC
HTB269
1.
2.
Remove the engine cover.
Disconnect the air intake hose from
air cleaner cover.
Loosen the drain plug at the bottom
of the fuel filter.
5. Open the hood.
Before performing aiming adjustment,
make sure of the following.
6. Draw the vertical line (through the
center of each headlight beam pat-
tern)andthehorizontalline(through
the center of each headlight beam
pattern) on the aiming screen.
3.
4.
5.
1.
2.
Keep all tires inflated to the correct
pressure.
Tighten the drain plug when water
no longer comes out.
Place the vehicle on level ground
andpressthefrontbumperandrear
bumper down several times. Place
the vehicle at a distance of 3,000
mm (118 in.) from the test wall.
See that the vehicle is unloaded
(except for full levels of coolant,
engine oil and fuel, and spare tire,
jack, and tools).
Check to be sure that the warning
lamp illuminates when the ignition
key is turned to "ON", and that it
goes off when the engine is started.
If in doubt, consult your nearest
authorized HYUNDAI dealer.
And then, draw the horizontal paral-
lel line at 30 mm (1.18 in.) under the
horizontal line.
3.
4.
7. Adjust each cut-off line of the low
beamtotheparallellinewithaphillips
screwdriver - VERTICAL AIMING.
8. Adjust each cut-off line of the low
beam to each vertical line with a
phillipsscrewdriver-HORIZONTAL
AIMING.
NOTE:
Clean the head lights lens and turn
on the headlight (low beam).
It is recommended that water accu-
mulated in the fuel filter should be
removed by an authorized Hyundai
dealer.
Product Specification
Categories | Hyundai Manuals, Hyundai Getz Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Getz |
Document File Type | |
Copyright | Attribution Non-commercial |