6-
32 DO-IT-YOURSELFMAINTENANCE
G290B01TB-GAT
Adjustment After Headlight As-
sembly Replacement
SPECIFICATIONS:
G270A01TB-GAT
REPLACEMENT OF BULBS
Headlight Bulb
"H"
Horizontal center line of headlights
from ground.
30mm (1.18 in.) Verticalline
Before attempting to replace a head-
light bulb, be sure the switch is turned
to the "OFF" position.
The next paragraph shows how to
reach headlight bulbs so they may be
changed. Be sure to replace the
burned-out bulb with one of the same
number and wattage rating.
:
656 mm (26.8 in.)
Horizontalline
15mm(0.59in.)
W
"P"
"W"
Distance between each headlight
center.
H
Cut-offline
:
1,100 mm (43.3 in.)
L
Ground
line
"L"
H
Distance between the headlights
andthewallthatthelightsaretested
against.
!
CAUTION:
G290B01L
Keep the lamps out of contact with
petroleum product, such as oil,
gasoline, etc.
If the vehicle has had front body repair
and the headlight assembly has been
replaced, the headlight aiming should
becheckedusingtheaimingscreenas
shown in the illustration. Turn on the
headlightswitch.(LowBeamPosition)
:
3,000 mm (118 in.).
1.
Adjust headlights so that main axis
oflightisparalleltocenterlineofthe
body and is aligned with point "P"
shown in the illustration.
2.
Dotted lines in the illustration show
the center of headlights.
| Categories | Hyundai Manuals, Hyundai Getz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Getz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)