DO-IT-YOURSELF MAINTENANCE
G030C01A-AAT
G030D01A-AAT
G040A02GK-AAT
To Check the Oil Level
Adding Oil
CHANGING THE OIL AND FILTER
DOHC
V6
DOHC
V6
DOHC
V6
HGK210
HGK211
G040A01GK
Before checking the oil, warm up the engine to
the normal operating temperature and be sure
your car is parked on level ground. Turn the
engine off.
Wait a minute, then remove the dipstick, wipe it
off, fully reinsert the dipstick and withdraw it
again. Then note the highest level the oil has
reached on the dipstick. It should be between
the upper ("FULL") and lower ("LOW") range.
If the oil level is close to or below the "LOW"
mark, add oil until it reaches the "FULL" mark.
To add oil:
The engine oil and filter should be changed at
those intervals specified in the maintenance
schedule in Section 5. If the car is being driven
in severe conditions, more frequent oil and filter
changes are required.
1. Remove the oil filler cap by turning it counter-
clockwise.
2. Add oil, then check the level again. Do not
overfill.
The procedure for changing the oil and filter is
as follows:
3. Replace the cap by turning it clockwise.
1.
Park the car on level ground and set the
parking brake. Start the engine and let it
warm up until the needle on the coolant
temperature gauge moves above the lowest
mark. Turn the engine off and place the gear
selector lever in "P" (automatic) or reverse
gear (manual transaxle). Set the parking
brake.
The distance between the "FULL" and "LOW"
marks is equal to about 1 quart of oil.
2.
Open the hood and remove the engine oil
filler cap.
6-4
| Categories | Hyundai Manuals, Hyundai Tiburon Manuals |
|---|---|
| Tags | Hyundai Tiburon 2.0, Hyundai Tiburon 2.7 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tiburon |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Automotive readers have rated 2003 Hyundai Tiburon Owners Manual 4.5 out of 5.0 based on 2 product reviews. thanks