DRIVING YOUR HYUNDAI
C020A01A-AAT
o
To start the engine, insert the ignition key
and turn it to the "START" position. Release
it as soon as the engine starts. Do not hold
the key in the "START" position for more
than 15 seconds.
ACC
BEFORE STARTING THE ENGINE
Before you start the engine, you should always:
LOCK
ON
1.
2.
Look around the vehicle to be sure there are
no flat tires, puddles of oil, water or other
indications of possible trouble.
After entering the car, check to be sure the
parking brake is engaged.
NOTE:
o
For safety, the engine will not start if the
clutch pedal is not depressed fully (Man-
ual transaxle) or the shift lever is not in
“P” or “N” Position (Automatic transaxle).
The ignition key cannot be turned from
"ACC" position to "LOCK" position un-
less the shift lever is in the "P" (Park)
position or the negative battery terminal
is disconnected from the battery. To re-
move the key, always confirm that the
shift lever is securely positioned in "P"
(Park) (For Automatic transaxle)
START
3.
4.
Check that all windows, and lights are clean.
Check that the interior and exterior mirrors
are clean and in position.
o
C040A01E
5.
Check your seat, seatback and headrest to
be sure they are in their proper positions.
Lock all the doors.
Fasten your seat belt and be sure that all
other occupants have fastened theirs.
Turn off all lights and accessories that are
not needed.
When you turn the ignition switch to “ON”,
check that all appropriate warning lights are
operating and that you have sufficient fuel.
o “START”
6.
7.
The engine is started in this position. It will
crank until you release the key.
NOTE:
8.
9.
Do not hold the key in the “START” position
for more than 15 seconds.
o
For additional information about start-
ing, see page 2-3.
o “ON”
10.Check
the operation of warning lights and all
When the key is in the “ON position, the ignition
is on and all accessories may be turned on. If
the engine is not running, the key should not be
left in the “ON” position. This will discharge the
battery and may also damage the ignition sys-
tem.
C040A01A-AAT
KEY POSITIONS
bulbs when key is in the “ON” position.
WARNING:
C030A01A-AAT
COMBINATION IGNITION SWITCH
To Start the Engine
The engine should not be turned off or the
key removed from the ignition key cylinder
while the vehicle is in motion. The steering
wheel is locked by removing the key.
o
If your Hyundai is equipped with a manual
transaxle, place the shift lever in neutral and
depress the clutch pedal fully.
o “ACC”
With the key in the “ACC” position, some elec-
trical accessories (radio etc.) may be operated.
o
If your Hyundai has an automatic transaxle,
place the shift lever in "P" (park).
2-
2
| Categories | Hyundai Manuals, Hyundai Tiburon Manuals |
|---|---|
| Tags | Hyundai Tiburon 2.0, Hyundai Tiburon 2.7 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tiburon |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Automotive readers have rated 2003 Hyundai Tiburon Owners Manual 4.5 out of 5.0 based on 2 product reviews. thanks