DRIVING YOUR HYUNDAI
o “LOCK”
C050B01A-AAT
The starter should not be operated for more
than 15 seconds at a time. Wait 15-30 sec-
onds between starting attempts to protect
the starter from overheating.
Normal Conditions:
The Starting Procedure:
The key can be removed or inserted in this
position. To protect against theft, the steering
wheel locks by removing the key.
1. Insert key, and fasten the seat belt.
2.
Depress the clutch pedal fully and place the
gearshift lever (manual transaxle) in neutral
or the selector lever (automatic transaxle) in
"P" (park) position.
NOTE:
C070C02A-AAT
To Remove the Ignition Key
To unlock the steering wheel, insert the key,
and then turn the steering wheel and key
simultaneously.
3. After turning the ignition key to the "ON"
position, make certain all warning lights and
gauges are functioning properly before start-
ing the engine.
C050A01A-AAT
STARTING
WARNING:
ACC
Be sure that the clutch is fully depressed
when starting a manual transaxle vehicle.
Your manual transaxle equipped vehicle will
not start unless the clutch pedal is fully
depressed. On a manual transaxle equipped
vehicle that can be started without depress-
ing the clutch, there is the potential to cause
damage to the vehicle or injury to someone
inside or outside the vehicle as a result of
the forward or backward movement of the
vehicle that will occur if the clutch is not
depressed when the vehicle is started.
LOCK
ON
C050A01E
(If your vehicle is equipped with an automatic
transaxle)
Turn the ignition key counterclockwise from
the "ACC" position to the "LOCK" position.
The key can be removed in the "LOCK"
position.
(If your vehicle is equipped with a manual
transaxle)
1. Turn the ignition key to the "ACC" position.
2. Simultaneously push and turn the ignition
key counterclockwise from the "ACC" posi-
tion to the "LOCK" position.
START
1.
2.
C070C01E
WARNING:
Never run the engine in a closed or poorly
ventilated area any longer than is needed to
move your car in or out of the area. The
carbon monoxide gas emitted is odorless
and can cause serious injury or death.
4.
Turn the ignition key to the "Start" position
and release it when the engine starts.
After the engine has started, allow the en-
gine to run for 10 to 20 seconds prior to
placing the vehicle in gear.
3. The key can be removed in the "LOCK"
position.
2-
3
| Categories | Hyundai Manuals, Hyundai Tiburon Manuals |
|---|---|
| Tags | Hyundai Tiburon 2.0, Hyundai Tiburon 2.7 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tiburon |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Automotive readers have rated 2003 Hyundai Tiburon Owners Manual 4.5 out of 5.0 based on 2 product reviews. thanks