STARTING AND OPERATING
3
17
D090C01P-GAT
Auto vacuum type free wheel
hubs (If installed)
D090D02P-GAT
Transfer shift switch operation
!
CAUTION:
By selecting the transfer shift
switch(4H, 4L), the both axles of the
vehiclearerigidlyconnectedwitheach
other. This improves the traction char-
acteristics.
If four wheel drive is to be used,
both the left and right free wheel
hubs must be set to the "LOCK"
position. Do not attempt to drive
the vehicle with the transfer shift
switch is selected to either the "4H"
or "4L" position if the free wheel
hubs are in the "FREE" position. If
the setting of the free wheel hubs is
tobechangedafterextendeduseof
the brake (such as for descending a
long slope), allow them to cool first.
Thefreewheelhubscanbebecome
extremely hot and could cause se-
vere burns.
The auto vacuum type free wheel hub
isdesignedtoallowforautomatic4WD
engagement when the transfer shift
switch is selected to the 4H or 4L
position.
When engaging and disengaging, the
auto vacuum type free wheel hubs will
make a clicking noise. This is normal.
2H→ 4H
Select the 4H mode switch at speed
below 60~70 km/h. It is not necessary
to depress the clutch pedal (manual
transmission) or put the shift lever into
"N" position (automatic transmission).
Perform this operation when driving
straight.
4H→ 2H
Select the 2H mode switch. This can
be done at any speed, and it is not
necessary to depress the clutch pedal
(manual transmission) or put the shift
leverinto"N"position(automatictrans-
mission). Perform this operation when
driving straight.
| Categories | Hyundai Manuals, Hyundai H-1 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Hyundai H-1 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)