DRIVINGYOURHYUNDAI 2
3
BEFORE STARTING THE ENGINE
TO START THE ENGINE
KEYPOSITIONS
C020A01A-AAT
C030A01A-AAT
C040A01A-AAT
COMBINATION IGNITION SWITCH
Before you start the engine, you should always:
!
The engine should not be turned off or the
key removed from the ignition key cylinder
while the vehicle is in motion. The steering
wheel is locked by removing the key.
o
If your Hyundai is equipped with a manual
transaxle, place the shift lever in neutral and
depress the clutch pedal fully.
1.
Look around the vehicle to be sure there are
no flat tires, puddles of oil, water or other
indications of possible trouble.
WARNING:
o
o
If your Hyundai has an automatic transaxle,
place the shift lever in "P" (park).
Tostarttheengine,inserttheignitionkeyand
turn it to the "START" position. Release it as
soon as the engine starts. Do not hold the
key in the "START" position for more than 15
seconds.
2.
After entering the car, check to be sure the
parking brake is engaged.
3.
4.
Check that all windows and lights are clean.
Check that the interior and exterior mirrors
are clean and in position.
5.
Check your seat, seatback and headrest to
be sure they are in their proper positions.
Lock all the doors.
Fasten your seat belt and be sure that all
other occupants have fastened theirs.
Turn off all lights and accessories that are
not needed.
When you turn the ignition switch to "ON",
check that all appropriate warning lights are
operating and that you have sufficient fuel.
ACC
LOCK
ON
6.
7.
NOTE:
o
For safety, the engine will not start if the
clutch pedal is not depressed fully
(Manual Transaxle) or the shift lever is
not in "P" or "N" Position (Automatic
Transaxle).
The ignition key cannot be turned from
"ACC" position to "LOCK" position un-
less the shift lever is in the "P" (Park)
position or the negative battery terminal
is disconnected from the battery. To
remove the key, always confirm that the
shift lever is securely positioned in "P"
(Park) (For Automatic Transaxle)
For additional information about start-
ing, see page 2-4.
8.
9.
o
START
10.Check
the operation of warning lights and all
bulbs when key is in the "ON" position.
C040A01E-1
o "START"
The engine is started in this position. It will crank
until you release the key.
o
| Categories | Hyundai Manuals, Hyundai Elantra Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)