Practical hints
Flat tire
୴
୴̈ Screw the air pump’s air hose 5 onto ̈ Unscrew the valve cap from tire
After 5 minutes, the pressure gauge must
display at least 26 psi (1.8 bar). The air
hose can become hot during inflation.
Please exercise appropriate caution.
flange 6 of the TIREFIT container.
valve 7.
̈
Stick TIREFIT container 1 upside
down into notch 3 of the electric air
pump.
̈ Screw filler hose a onto tire valve 7.
̈
Insert electrical plug 4 into vehicle
̈ If this tire inflation pressure is not at-
tained, turn off the electric air pump,
detach the filler hose from the tire
valve, and drive vehicle back and forth
very slowly approximately 30 ft (10 m).
cigarette lighter socket.
̈
Turn the SmartKey in the starter switch
to position 1 (୴ page 36).
or
This serves to better distribute the
TIREFIT sealant material inside the tire.
̈
̈
Press the KEYLESS-GO* start/stop
button (୴ page 37) on the gear selec-
tor lever once. Do not depress brake
pedal.
̈
Unscrew the air pump’s air hose 5
from flange 6 of the TIREFIT contain-
er.
Press I on electric air pump switch 8.
7
8
9
Tire valve
Screw air hose 5 onto tire valve 7.
Inflate the tire again.
̈
̈
The electric air pump should now
switch on and inflate the tire.
Electric air pump switch
Air hose with pressure gauge and vent
screw
!
a Filler hose
Do not operate the electric air pump
longer than eight minutes without in-
terruption. Otherwise it may overheat.
Warning!
G
You may operate the air pump again af-
ter it has cooled off.
Observe safety instructions on air pump la-
bel.
390
| Categories | Mercedes-Benz Manuals, Mercedes-Benz SL-Class Manuals |
|---|---|
| Tags | Mercedes-Benz SL500, Mercedes-Benz SL55 AMG, Mercedes-Benz SL600, Mercedes-Benz SL65 |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)