procedures with correspondingly trained per-
sonnel. Due to the high voltage present in the
system, there is a danger of fatal injuries when
work is carried out improperly.<
Side marker lamps, front and rear
To replace, please go to your BMW center or a
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel.
Parking and roadside parking lamps
In the event of a malfunction, please go to your
BMW center or a workshop that works accord-
ing to BMW repair procedures with correspond-
ingly trained personnel.
Tail lamps
>
>
>
Turn signals: bulb 21 watts, PY 21 W
Backup lamps: bulb 16 watts, W 16 W
Other lamps: bulb 21 watts, P 21 W
Turn signals, front
Bulb 21 watts, PY 21 W
1.
Turn the bulb holder to the left and remove.
1
2
3
4
5
6
Turn signal
Tail lamp and brake lamp
Tail lamp and brake lamp
Backup lamp
2.
Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
Reflector
Roadside parking lamp, tail lamp and
brake lamp
Side-mounted turn signals
Bulb 5 watts, W 5 W
Center brake lamp
1.
Press back against the front edge of the
light with the tip of your finger, then pivot it
out.
This lamp uses LED technology for operation.
In the event of a malfunction, please go to your
BMW center or a workshop that works accord-
ing to BMW repair procedures with correspond-
ingly trained personnel.
Fender-mounted lamps
The illustration shows the left-hand side of the
luggage compartment.
All the bulbs are integrated into a central bulb
fitting.
1.
2.
Lift up floor mat.
2.
3.
Turn the bulb holder to the left and remove.
Remove the bulb for replacement.
Undo the quick-release fasteners of the
side panel and pull out the panel.
189
Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E60, BMW M5 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)