1.
2.
3.
4.
Open the start menu.
Check Control
Press the controller to open the menu.
Select "Service" and press the controller.
The concept
The Check Control monitors functions in the
vehicle and issues a message if there is a mal-
function in the monitored systems. This kind of
Check Control message consists of indicator
and warning lamps in the instrument cluster,
and if necessary an acoustic signal and text
messages at the bottom of the Control Display.
Select "Service requirements" and press
the controller.
5.
6.
Select "Status" and press the controller.
Select "Emission inspect." or "State
inspection" and press the controller.
Indicator and warning lamps
7.
8.
Select "Set service date" and press the
controller. The month is highlighted.
Turn the controller to make the adjustment.
Indicator and warning lamps can light up both in
the display area 1 and in the display 2 in various
combinations and colors.
9.
Press the controller to apply the setting.
The year is highlighted.
10.
11.
Turn the controller to make the adjustment.
means that a Check Control message has
been generated. The symbol continues to be
visible even when the Check Control message
disappears after a short time. The warning
lamps and text messages are stored and can be
displayed later, also refer to page 68.
Press the controller to apply the setting.
The date entry is stored.
To exit the menu:
Select the arrow and press the controller.
67
Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW E60, BMW M5 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)