1
CONTROLS AND EQUIPMENT
10
B070F02A-EAT
KEYLESS ENTRY SYSTEM
(Not all models)
- Other vehicles or objects may be
blocking the signal.
B070E03GK-GAT
Replacing the battery
-
-
The weather is extremely cold.
Thetransmitterisclosetoaradio
transmittersuchasaradiostation
or an airport which can interfere
withnormaloperationofthetrans-
mitter.
When the transmitter's battery begins
togetweak,itmaytakeseveralpushes
on the button to lock or unlock the
doors, and the LED will not light. Re-
place the battery as soon as possible.
Locking doors
1
2
. Close all doors.
. Pushthe"LOCK"buttononthetrans-
mitter.
3
. At the same time all doors lock, the
turn signal lights will blink once to
indicate that the system is armed.
Whenthetransmitterdoesnotwork
correctly, open and close the door
with the ignition key. If you have a
problem with the transmitter, con-
tactaHyundaiauthorisedrepairer.
Battery type : CR2016
Replacement instructions:
Unlocking doors
1.
2.
Push the "UNLOCK" button on the
transmitter.
At the same time the driver's door
unlocks, the turn signal lights will
blink twice to indicate that the sys-
tem is disarmed.
NOTE:
Keep the transmitter away from wa-
ter or any liquid. If the keyless entry
system is inoperative due to expo-
suretowaterorliquids, itwillnotbe
covered by your manufacturer ve-
hiclewarranty.
NOTE:
Thetransmitterwillnotworkifanyof
followingoccur:
Screwdriver
OGK016122
-
-
-
The ignition key is in ignition
switch.
Youexceedtheoperatingdistance
limit (10 m).
The battery in the transmitter is
weak.
1.
Carefully seperate the case with a
blade screwdriver as shown in the
illustration.
gkfluk-1a.p65
10
12/26/2006, 5:11 PM
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)