2
DRIVING YOUR HYUNDAI
KEY POSITIONS
4
SC050A2-E
NOTE:
Do not hold the key in the "START"
position for more than 15 seconds.
YC030A2-E
STEERING WHEEL LOCK
!
When the ignition key is removed, the
steering wheel lock will be activated.
The lock only engages at one position
ofthesteeringwheelandthereforeitwill
benecessarytoturnthewheeluntilthis
position is reached. It is not, however,
necessary for the lock to be engaged
before leaving the vehicle since in the
event of attempted unauthorised re-
moval, the lock will engage when at-
tempts are made to steer the vehicle.
WARNING:
Theenginemustneverbeturnedoff
and the key removed from the igni-
tionkeycylinderwhilstthevehicleis
inmotionsincethesteeringlockwill
operate and control of the vehicle
will be lost.
o "ON"
When the key is at the "ON" position,
the ignition and all accessories are
available for use. If the engine is not
running, the key should not be left at
this position since the battery will be-
come discharged and damage to the
ignition system may also result. For
information regarding engine starting,
refer to "STARTING THE ENGINE".
ACC
LOCK
ON
NOTE:
Ifdifficultyisexperiencedinturning
the ignition key to the START posi-
tion, turn the steering wheel right
and left to release the tension and
then turn the key.
o "ACC"
When the ignition key is at the "ACC"
position, the radio and other accesso-
ries may be used.
START
o "LOCK"
!
C040A01E
CAUTION:
Theignitionkeymayonlybeinsertedor
removed at this position.
o "START"
Never remove the key from the igni-
tion lock whilst the vehicle is in
motion since the steering mecha-
nism lock will be activated.
The engine is started in this position. It
will crank until you release the key.
gkfluk-2.p65
4
12/26/2006, 5:19 PM
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)