3 WHATTODOINANEMERGENCY
4
IF THE ENGINE OVERHEATS
Next, using the other cable, attach one
D030A01A-AAT
!
While the engine is running, keep hair,
hands, and clothing away from moving
parts such as the fan and drive belts to
prevent injury.
clamp to the negative (-) post or cable of the
booster battery. Then attach the other end
ofthatcabletoasolidmetalpartoftheengine
of the vehicle with the discharged battery
away from the battery. Do not connect the
cable to any moving part.
Start the engine in the car with the booster
battery and let it run for a few minutes. This
will help to assure that the booster battery is
fully charged. During the jumping operation,
run the engine in this vehicle at about 2,000
rpm.
Start the engine in the car with the dis-
charged battery using the normal starting
procedure. After the engine starts, leave the
jumper cables connected and let the engine
run at fast idle or about 2,000 rpm for several
minutes.
If your temperature gauge indicates overheat-
ing,youexperiencealossofpower,orhearloud
pinging or knocking and the engine is probably
too hot. If this happens and, you should:
WARNING:
1
. Pull off the road and stop as soon as it is safe
to do so.
4.
5.
6.
2.
Place the gear selector lever in "P" (auto-
matic) or neutral (manual transaxle) and set
theparkingbrake.Iftheairconditioning ison,
turn it off.
5.
If the water pump drive belt is broken or
enginecoolantisleakingout,stoptheengine
immediately and call the nearest Hyundai
dealer for assistance.
3.
If engine coolant is running out under the car
or steam is coming out from the hood, stop
the engine. Do not open the hood until the
engine coolant has stopped running or the
steaming has stopped. If there is no visible
loss of engine coolant and no steam, leave
the engine running and check to be sure the
engine cooling fan is operating. If the fan is
not running, turn the engine off.
!
Do not remove the radiator cap when the
engine is hot. This can allow coolant to be
blown out of the opening and cause seri-
ous burns.
WARNING:
Carefully remove the jumper cables in the
reverse order of attachment.
4.
Check to see if the water pump drive belt is
missing. If it is not missing, check to see that
it is tight. If the drive belt seems to be
satisfactory, check for engine coolant leak-
ing from the radiator, hoses or under the car.
(If the air conditioning had been in use, it is
normal for cold water to be draining from it
when you stop).
6.
If you cannot find the cause of the overheat-
ing, wait until the engine temperature has
returnedtonormal.Then,ifcoolanthasbeen
lost, carefully add coolant to the reservoir
(page 6-8) to bring the fluid level in the
reservoir up to the halfway mark.
Proceed with caution, keeping alert for fur-
ther signs of overheating. If overheating
happens again, call a Hyundai dealer for
assistance.
If you do not know why your battery became
discharged (because the lights were left on,
etc.), have the charging system checked by
your Hyundai dealer.
7.
| Categories | Hyundai Elantra Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Elantra 2.0 |
| Model Year | 2006 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Automotive readers have rated 2006 Hyundai Elantra Owners Manual 4.5 out of 5.0 based on 2 product reviews. This an excelent page for al users