5 VEHICLEMAINTENANCEREQUIREMENTS
8
F060B01A-AAT
F070E06A-AAT
F070H01A-AAT
o Drive Belts
o Automatic Transaxle Fluid
o Rear Brake Drums/Linings,
Parking Brake
Inspect all drive belts for evidence of cuts,
cracks, excessive wear or oil saturation and
replace if necessary. Drive belts should be
checked periodically for proper tension and
adjusted as necessary.
The fluid level should be in the "HOT" range of
the dipstick, after the engine and transaxle are
at normal operating temperature. Check the
automatic transaxle fluid level with the engine
running and the transaxle in neutral, with the
parking brake properly applied. Use HYUNDAI
GENUINEATFSPIII,DIAMONDATFSPIII,SK
ATF SP III or other brands meeting the SP III
Check the rear brake drums and linings for
scoring, burning, leaking fluid, broken parts,
and excessive wear. Inspect the parking brake
system including the parking brake lever and
cables. For detailed service procedures, refer
to the Shop Manual.
F070C01A-AAT
o Engine Coolant
specifiction approved by Hyundai Motor
Co.
when adding or changing fluid. Using the wrong
ATF may result in damage to the ATM.
Thecoolant should be changedat theintervals
specified in the maintenance schedule.
F070J01A-AAT
o Brake Pads, Calipers and Rotors
F070G02A-AAT
o Brake Fluid
Check the pads for excessive wear, discs for
run out and wear, and calipers for fluid leakage.
F060E01A-AAT
o TimingBelt
Check brake fluid level in the brake fluid reser-
voir. The level should be between "MIN" and
"MAX" marks on the side of the reservoir. Use
only hydraulic brake fluid conforming to DOT 3
or DOT 4.
Inspect all parts related to the timing belt for
damage and deformation. Replace any dam-
aged parts immediately.
F070K01A-AAT
o Exhaust Pipe and Muffler
Visually inspect the exhaust pipes, muffler and
hangers for cracks, deterioration, or damage.
Start the engine and listen carefully for any
exhaust gas leakage. Tighten connections or
replace parts as necessary.
F070D01A-AAT
o Manual Transaxle oil
F070F01A-AAT
o Brake Hoses and Lines
Inspect the manual transaxle oil according to
the maintenance schedule.
Visually check for proper installation, chafing,
cracks, deterioration and any leakage. Replace
any deteriorated or damaged parts immedi-
ately.
NOTE:
If the oil level is low, check for possible leaks
before adding oil. Do not overfill.
| Categories | Hyundai Elantra Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Elantra 2.0 |
| Model Year | 2006 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Automotive readers have rated 2006 Hyundai Elantra Owners Manual 4.5 out of 5.0 based on 2 product reviews. This an excelent page for al users