6 DO-IT-YOURSELFMAINTENANCE
CHECKING DRIVE BELTS
20
CHECKINGANDREPLACINGFUSES
G190A01A-AAT
G200A03A-AAT
Replacing a Fusible Link
!
Water Pump Pulley
CAUTION:
When replacing a fusible link, never use
anything but a new fusible link with the
same or lower amperage rating. Never use
a piece of wire or a higher-rated fusible link.
This could result in serious damage and
create a fire hazard.
0.2
(5.1
~ 0.24 in.
~ 6 mm)
Open-Replace
Good
Generator
Pulley
Crankshaft Pulley
HTB186
Drive belts should be checked periodically for
proper tension and adjusted if necessary. At the
sametime,beltsshouldbeexaminedforcracks,
wear, fraying or other evidence of deterioration
and replaced if necessary.
Belt routing should also be checked to be sure
there is no interference between the belts and
otherpartsoftheengine.Afterabeltisreplaced,
the new belt should be adjusted again after two
or three weeks to eliminate slack resulting from
initial stretching after use.
G200A01E
Afusiblelinkwillmeltiftheelectricalcircuitsfrom
the battery are ever overloaded, thus prevent-
ing damage to the entire wiring harness. (This
could be caused by a short in the system
drawing too much current.) If this ever happens,
have a Hyundai dealer determine the cause,
repair the system and replace the fusible link.
The fusible links are located in a relay box in the
engine compartment for easy inspection.
| Categories | Hyundai Elantra Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Elantra 2.0 |
| Model Year | 2006 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Automotive readers have rated 2006 Hyundai Elantra Owners Manual 4.5 out of 5.0 based on 2 product reviews. This an excelent page for al users