MAINTENANCE
•
If the vehicle has been driven for an
extended period at high speeds or in
city traffic in hot weather, it is usually
best to measure the fluid level after
stopping the engine and allowing the
fluid to cool for 30 minutes.
LUBRICANTS AND
FLUIDS
CHECKING THE WASHER
FLUID LEVEL
HOT
Check the fluid level in the washer fluid
reservoir and add fluid if necessary.
Plain water may be used if washer fluid
When inserting the dipstick, be sure to
insert it completely. When adding fluid,
measure frequently with the dipstick to
make sure the fluid level does not go
above the Full position. Do not overfill.
Use only the specified automatic
transaxle fluid. (Refer to “Recommended
Lubricants” later in this section)
is
not
available.
However,
solvent
use
with
MMSA7011
windshield
washer
USING THE HOT FLUID SCALE:
If the vehicle has been driven and the
fluid is warmed to the normal operating
temperature of approximately 158~176ºF
antifreeze characteristics in cold climates
to prevent freezing.
(70~80ºC),
the fluid level should be
within “HOT” range.
•
Use the cold scale as a rough reference
only.
•
If the outside temperature is lower than
68ºF
(20ºC), start the engine and
measure the fluid level after letting the
engine reach operating temperature.
MMSA7012
7-20
| Categories | Kia Magentis Manuals, Kia Manuals |
|---|---|
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)