1.
Raise the wiper arm and turn the
wiper blade assembly to expose the
plastic locking clip.
2. Firmly grasp the end of the rubber
blade and pull until the tabs are free
of the metal support.
BATTERY
WARNING - Battery
Compress the clip and slide the blade
assembly toward the windshield, then
slide it off the arm.
3. Remove the metal retainers from the
rubber blade and install them in the
new rubber blade.
dangers
Always read the following
instructions carefully
when handling a battery.
✻
NOTICE
Do not bend the metal retainers.
Keep lighted cigarettes and
all other flames or sparks
away from the battery.
4.
Carefully insert a new rubber blade
and re-install the blade assembly in
the reverse order of removal.
Hydrogen, which is a
highly combustible gas, is
always present in battery
Install the blade with the tabs facing
cells and may explode if ignited.
towards the bottom of the wiper arm.
If any electrolyte gets
into your eyes, flush
your eyes with clean
MMSA7014
water for at least 15 minutes
and get immediate medical
attention. If possible, continue
to apply water with a sponge or
cloth until medical attention is
received. If electrolyte gets on
your skin, thoroughly wash the
contacted area. If you feel a
pain or a burning sensation, get
medical attention immediately.
✻
NOTICE
Do not allow the wiper arm to fall
against the windshield.
MMSA7017
(Continued)
7-23
Product Specification
Categories | Kia Magentis Manuals, Kia Manuals |
---|---|
Model Year | 2006 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |