Seat, mirror and steering
wheel memory
The adjusting procedure for the steering wheel
is interrupted if you briefly press the switch for
the steering wheel adjustment in any direction,
refer to page 55.
Safety feature
1.
Close the driver's door and switch ignition
on or off, refer to page 59.
2.
Press the desired memory button 1, 2 or 3
and maintain pressure until the adjustment
process has been completed.
If the
button was pressed inadvertently:
You can store and select three different adjust-
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
press the button again; the LED goes out.
Activating with remote control
The adjustment of the lumbar support is not
stored in the memory.
The last positions of the driver's seat, external
rearview mirrors, and steering wheel are stored
for the remote key currently in use.
Storing
You can choose when the position is requested:
1.
2.
3.
4.
Switch on radio readiness or ignition, refer
to page 59.
>
>
Request when unlocking vehicle
Request when opening driver's door
Adjust the desired seat, exterior mirror and
steering-wheel positions.
When using this feature, always make
sure that the footwell behind the driver's
Press the
button:
seat is empty and unobstructed. If you fail to do
so, any persons or objects behind the seat
could be injured or damaged by a rearward
movement of the seat.<
The LED in the button lights up.
Press the desired memory button 1, 2 or 3:
The LED goes out.
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
Requesting
Do not request a position from the mem-
ory while the vehicle is moving. There is a
risk of accident from unexpected movement of
the seat or steering wheel.<
iDrive, for explanation of principle, refer to
page 16.
1.
2.
3.
4.
Open the start menu.
Comfort mode
Press the controller to open the menu.
Select "Settings" and press the controller.
1.
Open the driver's door after unlocking or
switch on radio readiness, refer to page 59.
Select "Vehicle / Tires" and press the con-
troller.
2.
Briefly press the desired memory button 1,
2
or 3.
5.
Change to upper field if necessary. Turn the
controller until "Door locks" is selected and
press the controller.
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
50
Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 645Ci, BMW E63, BMW E64 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)