Activating system
Turn signals/
headlamp flasher
With the ignition switched on, press the SPORT
button.
The LED in the button lights up and SPORT is
displayed in the instrument cluster.
1
2
3
High beams
Headlamp flasher
Turn signals
Deactivating system
>
>
>
Press the SPORT button again or
shift into reverse or
Using turn signals
Move the lever beyond the resistance point.
switch off the engine.
To switch off manually, only press the lever to
the resistance point.
The LED in the button and SPORT in the instru-
ment cluster go out.
Atypically rapid flashing of the indicator
lamp indicates the failure of a turn signal
lamp.<
Acceleration assistant with SMG
The acceleration assistant enables optimized
vehicle acceleration at race car level on road
surfaces with good adhesion when starting off.
Signaling briefly
Press the lever to the resistance point and hold
it there as long as you wish to signal.
Do not use the acceleration assistant too
often; otherwise, components will wear
prematurely.<
Triple turn signal activation
1.
2.
3.
Activate the Dynamic Driving Control.
Deactivate DSC, refer to page 88.
Press the lever to the resistance point; the turn
signals flash three times.
You can activate or deactivate this function.
Press the accelerator pedal down fully:
kick-down. The ideal starting-off engine
speed is set.
iDrive, for explanation of principle, refer to
page 16.
To maintain vehicle stability, reactivate
DSC afterward.<
1.
2.
3.
4.
Open the start menu.
Press the controller to open the menu.
Select "Settings" and press the controller.
Select "Vehicle / Tires" and press the con-
troller.
65
Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 645Ci, BMW E63, BMW E64 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)