Deactivating system
Displays in instrument cluster
Press the lever up or down. The displays in the
instrument cluster disappear.
1
2
Stored desired speed
Lights up yellow: vehicle driving ahead is
detected
You also deactivate the system when you apply
the brakes, shift very slowly, or shift into neutral.
In addition, the system is deactivated automati-
cally:
Flashes red, a signal sounds: the system
cannot establish the distance, you must
apply the brakes
>
>
>
when you activate the DTC Dynamic Trac-
tion Control
Flashes yellow: driving stability control sys-
tems intervene, the active cruise control is
deactivated
when you deactivate the DSC Dynamic Sta-
bility Control
3
4
Selected distance to vehicle driving ahead:
lights up as soon as the system is activated
when the system does not recognize any
objects for a longer time, e.g. on infre-
quently traveled roads without a shoulder or
guard rails, or if the radar sensor is covered
with dirt, refer to page 72
Selected desired speed appears briefly
If the display ACC --- mph/km/h briefly
appears in the instrument cluster, it might
be that conditions necessary for operation are
not currently being met. To call up Check Con-
trol messages, refer to page 80.<
>
when the speed is reduced to below
20
mph/30 km/h due to a traffic situation
The system deactivates automatically
when the speed is set to below 20 mph/
km/h. A signal sounds and a message
Warning lamps
30
appears in the Control Display. The active inter-
vention of the driver is required, otherwise there
is a risk of an accident.<
The display 2 flashes red and a sig-
nal sounds.
The system is warning you to inter-
vene by braking or executing an
Resuming stored desired speed and
distance
evasive maneuver. The active
cruise control cannot automatically restore the
distance to the vehicle driving ahead.
This display does not, however, relieve the
driver of the responsibility for adapting desired
speed and driving style to traffic conditions.
Press button 4.
The displays appear in the instrument cluster.
When you switch off the ignition, the stored
desired speed is deleted.
The display 2 flashes yellow.
Automatic intervention by ABS or
DSC. The active cruise control
intervenes by braking until you
actively take over.
71
Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 645Ci, BMW E63, BMW E64 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)