Controls in detail
Automatic transmission*
Shifting procedure
G
!
Allow engine to warm up under low load use.
Do not place full load on the engine until the
operating temperature has been reached.
Warning!
The automatic transmission selects indi-
vidual gears automatically, depending on:
It is dangerous to shift the gear selector
lever out of park position P or neutral
position N if the engine speed is higher than
idle speed. If your foot is not firmly on the
brake pedal, the vehicle could accelerate
quickly forward or reverse. You could lose
control of the vehicle and hit someone or
something. Only shift into gear when the
engine is idling normally and when your right
foot is firmly on the brake pedal.
Shift into reverse gear R or park position P only
when the vehicle is stopped.
ț
gear selector lever position D
(
୴ page 153) with gear ranges
Avoid spinning of a drive wheel when driving off
on slippery road surfaces. This may cause seri-
ous damage to the drivetrain which is not cov-
ered by the Mercedes-Benz Limited Warranty.
(
୴ page 156)
ț
ț
ț
the selected program mode (C/S)
୴ page 157)
(
When the gear selector lever is in drive
position D, you can influence transmission
shifting by:
the position of the accelerator pedal
(
୴ page 155)
the vehicle speed
limiting the gear range
changing gears manually
ț
ț
An additional indication of the current gear
selector lever position can be found on the
cover of the shifting-gate.
The indicators come on when you activate
a switch (e.g. unlocking the vehicle or
opening a door) and go out after approxi-
mately 15 minutes.
152
Product Specification
Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C280, Mercedes-Benz C350, Mercedes-Benz W204 |
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Thanks for the great Manuel.
Thanks for the help
how to download the pdf