Controls in detail
Useful features
gins to flash after approximately
mitter button (2, 3 or 4). Do not
release the buttons until step 5 is com-
pleted.
If indicator lamp 1 stays on
20
seconds (do not hold the button for
constantly, programming is complete
and your device should activate when
the respective signal transmitter
button (2, 3 or 4) is pressed and re-
leased.
longer than 30 seconds). This proce-
dure erases any previous settings for
all three channels and initializes the
memory.
Indicator lamp 1 will flash, first slowly
and then rapidly.
i Indicator lamp 1 flashes immediately the
first time the signal transmitter button is pro-
grammed. If this button has already been pro-
grammed, the indicator lamp will only start
flashing after 20 seconds.
If you later wish to program a second
and/or third hand-held transmitter to
the remaining two signal transmitter
buttons, do not repeat this step and be-
gin directly with step 3.
i If indicator lamp 1 flashes rapidly for about
2 seconds and then turns to a constant light,
continue with programming steps 8 through 12
as your garage door opener may be equipped
with the “rolling code” feature.
Step 5:
Step 7:
Step 3:
̈
After indicator lamp 1 changes from a
slow to a rapidly flashing light, release
the hand-held remote control button
and the signal transmitter button.
̈
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
̈
Hold the end of hand-held remote
control 5 of the device you wish to
train approximately 2 to 5 in
(5
to12 cm) away from the signal trans-
Step 6:
Rolling code programming
mitter button (2, 3 or 4) to be pro-
grammed, while keeping indicator
lamp 1 in view.
̈ Press and hold the just-trained signal
transmitter button (2, 3 or 4) and
observe indicator lamp 1.
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 4:
̈
Using both hands, simultaneously
press hand-held remote control
button 6 and the desired signal trans-
255
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C280, Mercedes-Benz C350, Mercedes-Benz W204 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4 out of 5)
Automotive readers have rated 2007 Mercedes-Benz C-Class Operators Manual C230 Sport C280 4MATIC C350 4MATIC C350 Sport 4.0 out of 5.0 based on 4 product reviews. Thanks for the great Manuel.
Thanks for the help
how to download the pdf