Controls in detail
Useful features
Step 8:
Step 11:
Gate operator/Canadian programming
̈
Locate “training” button on the garage
door opener motor head unit.
̈ Press, hold for 2 seconds and release
same signal transmitter button a sec-
ond time to complete the training
process.
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the
integrated signal transmitter to pick up the
signal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn” or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
Operator’s Manual.
i Some garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to com-
plete the training process.
Step 12:
If you live in Canada or if you are having
difficulties programming a gate operator
(regardless of where you live) by using the
programming procedures, replace step 4
with the following:
Step 9:
Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or 4).
̈
̈
Press the “training” button on the ga-
rage door opener motor head unit.
Step 13:
The “training light” is activated.
Step 4:
̈
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
You have 30 seconds to initiate the
following step.
̈
Press and hold the signal transmitter
button (2, 3 or 4). Do not release
this button until it has been successful-
ly trained.
Step 10:
̈
Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
̈
While still holding down the signal
transmitter button (2, 3 or 4),
“cycle” your hand-held remote control
button 6 as follows: Press and hold
(
2, 3 or 4).
256
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C-Class, Mercedes-Benz C230, Mercedes-Benz C280, Mercedes-Benz C350, Mercedes-Benz W204 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4 out of 5)
Automotive readers have rated 2007 Mercedes-Benz C-Class Operators Manual C230 Sport C280 4MATIC C350 4MATIC C350 Sport 4.0 out of 5.0 based on 4 product reviews. Thanks for the great Manuel.
Thanks for the help
how to download the pdf