Possible displays
1.
Press the
button.
This opens the start menu.
2.
3.
Press the controller to open the menu.
Select "Info sources" and press the control-
ler.
1
2
Oil level OK
Oil level is being checked.
This can take about 3 minutes if the car is at
a standstill on a level surface, or about
5
minutes while the car is on the move.
4.
5.
Select "Service" and press the controller.
3
4
Oil level down to minimum:
If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Service requirements" is selected and
press the controller.
Add engine oil as soon as possible, but no
more than 1 US quart/1 liter, refer also to
Adding engine oil on page 212.
Oil level is too high.
Too much oil will harm the engine.
Have the vehicle checked without
delay.<
5
The oil level sensor is defective.
Do not add engine oil. You can continue
your journey. Note the newly calculated dis-
tance remaining to the next oil service, refer
to page 214. Have the system checked as
soon as possible.
6.
If necessary, move the highlight marker to
the second field from the top. Turn the con-
troller until "Engine oil level" is selected and
press the controller.
Display via iDrive
iDrive, for operating principle refer to page 16.
The oil level is displayed.
To exit the display immediately:
Select
and press the controller.
211
Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG
| Categories | BMW 1-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 128i, BMW 135i, BMW E82 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)