3.
Allow the belt strap to retract and pull it taut
against the child-restraint system.
Convertible: rear seats
The safety belt is locked.
To unlock the safety belt
1.
2.
3.
Open the belt buckle
Remove the child-restraint system.
Allow the safety belt strap to retract all the
way.
The anchor points for the lower LATCH
anchors are located at the positions indicated
by arrows, in the gap between the seat and the
backrest.
LATCH child-restraint fixing
system
LATCH: Lower Anchors and Tethers for CHil-
dren.
Coupe: child-restraint system with
tether strap
To install and use the LATCH child-
restraint system, follow the operating and
safety instructions provided by the manufac-
turer of the system, otherwise the protective
function of the seat may be compromised.<
Use the top tether anchors to secure
child-restraint systems only, otherwise
the anchors could be damaged.<
Before installing the child seat, pull the belt out
of the area for the child-restraint fixing system.
Ensure that both lower LATCH anchors
are correctly engaged and that the child-
restraint system is resting firmly against the
backrest, otherwise the protective function of
the seat may be compromised.<
Coupe: rear seats
For child-restraint systems with tether straps
there are two additional anchors, see arrows.
Coupe: placement of the tether strap
Make sure the upper retaining strap does
not run over sharp edges and is not
twisted as it passes to the top anchor. Other-
wise the strap will not properly secure the child-
restraint system in the event of an accident.<
The anchor points for the lower LATCH
anchors are located behind the labeled protec-
tive caps.
56
Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG
| Categories | BMW 1-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 128i, BMW 135i, BMW E82 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)