Wind deflector
5.
Position the free locking pins at the corre-
sponding openings and let the spring ten-
sion lock the wind deflector in place.
The wind deflector keeps air currents in the
passenger compartment at a low level when the
convertible top is down and provides for an
even more pleasant journey at higher speeds.
Installation
1.
Remove the wind deflector from the protec-
tive cover and unfold it, arrows 1.
6.
Fold up the top section of the wind deflec-
tor.
With the wind deflector installed: do not
recline the front-seat backrests too far if
the seat is to be slid all the way back, as this
would damage the wind deflector.<
2.
3.
Press together the top and bottom parts of
the wind deflector until the catch engages,
arrow 2.
Removing the wind deflector
Proceed in the reverse order as used for instal-
lation.
Position both locking pins of one side at the
openings provided for them.
Folding
4.
Press the wind deflector into the openings,
arrows 3, overcoming the tension in the
springs, and push the free locking pin in the
same direction, arrow 4.
Slide the red release lever towards the middle of
the wind deflector and push the two halves
apart.
44
Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG
| Categories | BMW 1-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 128i, BMW 135i, BMW E82 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)