Removing the headlamp cover
4.
5.
6.
Reattach the bulb holder with the notch at
the top.
1.
Pull the wire brackets over the notches, see
arrow, and fold to the side.
Fold the holding bracket back up and let it
snap into place.
Attach the headlamp cover.
Parking lamps, roadside parking lamps
5 watt bulb, W5W
1.
Remove the headlamp cover.
2.
Fold away the headlamp cover.
Be careful when attaching the headlamp
cover and ensure that both wire brackets
are securely in place, otherwise leaks could
occur and cause damage to the headlamp sys-
tem.<
Attach the headlamp cover in reverse order.
The figure shows the right-hand headlamp.
2.
3.
4.
5.
Pull out the bulb holder.
Halogen headlamps
Remove and replace the bulb.
Reinsert the bulb holder.
Attach the headlamp cover.
Halogen low beams and high beams
H7 bulb, 55 watts
Always wear gloves and eye protection;
the atmosphere within the H7 bulb is
pressurized. Otherwise there is a risk of injury if
the bulb is damaged.<
Xenon headlamps
Parking lamps, roadside parking
lamps, daytime running lamps
H8 bulb, 35 watts
The figure shows the right-hand headlamp.
1
High beams
The figure shows the right-hand headlamp.
2
Low-beam headlamps
1.
2.
3.
Remove the headlamp cover.
1.
2.
3.
Remove the headlamp cover.
Fold down the holding bracket.
Remove and replace the bulb.
Turn the bulb, see arrow, and remove it.
Pull off the connector and replace the bulb.
217
Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG
| Categories | BMW 1-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 128i, BMW 135i, BMW E82 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)