Indication of malfunction urgency
Speed limit
You can enter a speed and a Check Control
message indicates when you have reached this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph/5 km/h.
Displaying, setting or changing limit
Depending on your vehicle's equipment, the
stored Check Control messages are also dis-
played with the following symbols:
iDrive, for operating principle refer to page 16.
1.
2.
Open the start menu.
No malfunctions are present in the moni-
tored systems.
Open "Navigation".
Without navigation system*:
Malfunctions are present in the moni-
tored systems. Depending on the mal-
function, supplementary information is
shown on the Control Display.
Open "Car Data".
3.
4.
Select "Car Data" and press the controller.
Select "Limit" and press the controller.
The symbols also indicate the status of the ser-
vice requirements display, refer to page 81.
Displays after completion of trip
Malfunction reports generated during the trip
are shown consecutively when you switch off
the ignition.
Before the display disappears, you can display
the messages once again. Press the CHECK
button for approx. 2 seconds. If several mes-
sages are present, you can continue to press
the CHECK button to view them in succession.
5.
6.
Select the speed value and press the con-
troller.
Turn the controller to set the limit. If
needed, hold it against a slight resistance
to enter a larger difference.
The display goes out
>
>
automatically after a brief period
7.
Press the controller to apply the setting.
The limit is automatically activated.
when you press the CHECK button again
for approx. 2 seconds
Applying your current speed as limit
Select "Select current speed" and press the
controller. The system adopts your current
speed as the limit.
Activating limit
Select "On" and press the controller.
Limit is automatically activated.
85
Online Edition for Part no. 01 41 0 014 240 - © 08/07 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 525i, BMW 525xi, BMW 530i, BMW 530xi, BMW 550i, BMW E60 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Automotive readers have rated 2008 BMW 5-Series 525i 525xi 530i 530xi 550i E60 Owners Manual 5.0 out of 5.0 based on 2 product reviews. I bought mine used and it came with a 7 series manual and service records in it.
Sweet. I bought mine used and it came with a manual for a 7 series.