Sports Wagon: self-leveling
suspension
System limits
The Flat Tire Monitor cannot indicate sudden
severe tire damage caused by outside factors
and does not detect a natural, even pressure
drop in all four tires.
Malfunction
The warning lamp for self-leveling sus-
pension lights up yellow and a message
is shown on the Control Display. A mal-
In the following situations, the system could be
delayed or malfunction:
function has occurred in the self-leveling sus-
pension. Stop and check the vehicle. If it is con-
siderably lower at the rear than at the front, and
possibly also on one side – rear left compared to
rear right –, go to the nearest BMW center or a
workshop that works according to BMW repair >
procedures with correspondingly trained per-
sonnel. Drive with appropriate caution in the
meantime. The vehicle has reduced ground
clearance and driving comfort may be notice-
ably reduced. Even if the position of the vehicle
is normal, go to the nearest BMW center or a
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel.
System has not been initialized
>
>
>
Driving on snowy or slippery road surface
Sporty driving style: slip in the drive wheels,
high lateral acceleration
Driving with snow chains*
When you are driving with the compact wheel*
the Flat Tire Monitor is unable to function.
Initializing system
The initialization finishes during driving,
which can be interrupted at any time.
When driving resumes, the initialization is con-
tinued automatically. Do not initialize the sys-
tem when driving with snow chains* or com-
pact wheel*.<
FTM Flat Tire Monitor*
iDrive, for operating principle refer to page 16.
1.
Press the
button.
The concept
This opens the start menu.
2.
Press the controller to open the menu.
The Flat Tire Monitor detects a pressure loss in
one tire by comparing the speeds of the individ-
ual wheels during driving.
In the event of a pressure loss, there is a change
in the rolling circumference and therefore the
rotation speed of the corresponding wheel. The
system detects this change and reports it as a
flat tire.
Functional requirement
In order to assure the reliable reporting of a flat
tire, the system must be initialized for the cor-
rect tire inflation pressure.
3.
4.
Turn the controller until "Settings" is
selected and press the controller.
Select "Vehicle / Tires" and press the con-
troller.
The initialization must be repeated after
each time the tire inflation pressure is cor-
rected and after every tire or wheel change.<
95
Online Edition for Part no. 01 41 0 014 240 - © 08/07 BMW AG
| Categories | BMW 5-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 525i, BMW 525xi, BMW 530i, BMW 530xi, BMW 550i, BMW E60 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Automotive readers have rated 2008 BMW 5-Series 525i 525xi 530i 530xi 550i E60 Owners Manual 5.0 out of 5.0 based on 2 product reviews. I bought mine used and it came with a 7 series manual and service records in it.
Sweet. I bought mine used and it came with a manual for a 7 series.