Switching off via iDrive
Interior lamps
iDrive, for operating principle refer to page 16.
1.
Press the
button.
This opens the start menu.
2.
3.
4.
Press the controller to open the menu.
Select "Settings" and press the controller.
Select "Vehicle / Tires" and press the con-
troller.
5.
Change to upper field if necessary. Turn the
controller until "Lighting" is selected and
press the controller.
Control of the interior lamps, footwell lamps,
door entry lighting, courtesy lamps and sill
panel lighting is automatic.
With the courtesy lamps, LED lights are located
in the door handles to illuminate the exterior
area before the doors.
To protect the battery, all lamps in the
vehicle are switched off approx. 15 min-
utes after radio readiness is switched off, refer
to Start/Stop button on page 59.<
6.
Select "High-beam assistant" and press
the controller.
Switching interior lamps on and off
manually
High-beam assistant is switched off.
Press button 1.
The setting is stored for the remote control cur-
rently in use.
If the interior lamps, footwell lamps, door entry
lighting, courtesy lamps and sill panel lighting
are to remain switched off continually, press the
button for approx. 3 seconds.
Instrument lighting
Reading lamps
The reading lamps are beside the interior lamp:
You can turn them on and off using buttons 2
located next to the lamps.
The lighting intensity can be adjusted with the
knurled wheel with the parking lamps/low
beams switched on.
100
Online Edition for Part no. 01 41 0 014 244 - © 08/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64, BMW M6 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)