5.
Change to upper field if necessary. Turn the
controller until "Lighting" is selected and
press the controller.
6.
7.
8.
Select "Pathway lighting" and press the
controller.
Turn the controller to select the desired
duration.
Press the controller to apply the setting.
The setting is stored for the remote control cur-
rently in use.
Daytime running lamps*
The daytime running lamps light up in posi-
tion 0, 1 and 3. If the light switch remains in
position 1, the parking lamps light up after the
ignition is switched off.
6.
Select "Welcome light" and press the con-
troller.
Activating/deactivating daytime
running lamps*
The welcome lamps are switched on.
The setting is stored for the remote control cur-
rently in use.
1.
2.
3.
4.
Open the start menu.
Press the controller to open the menu.
Select "Settings" and press the controller.
Pathway lighting
When you activate the headlamp flasher after
parking the vehicle and switching off the lamps,
the low beams will come on for a brief period.
You can set the duration or deactivate the func-
tion via iDrive.
Select "Vehicle / Tires" and press the con-
troller.
5.
Change to upper field if necessary. Turn the
controller until "Lighting" is selected and
press the controller.
iDrive, for operating principle refer to page 16.
1.
Press the
button.
This opens the start menu.
2.
3.
4.
Press the controller to open the menu.
Select "Settings" and press the controller.
Select "Vehicle / Tires" and press the con-
troller.
5.
Change to upper field if necessary. Turn the
controller until "Lighting" is selected and
press the controller.
6.
Select "Daytime running lamps" and press
the controller.
The daytime running lamps are
switched on.
The setting is stored for the remote control cur-
rently in use.
97
Online Edition for Part no. 01 41 0 014 244 - © 08/07 BMW AG
Product Specification
Categories | BMW 6-Series Manuals, BMW Manuals |
---|---|
Tags | BMW 650i, BMW E63, BMW E64, BMW M6 |
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |