Electronic brake-force distribution
lute driving limit is reached. Steering correc-
tions by the driver may also be required in this
driving state.
This system controls the brake system's appli-
cation pressure at the rear wheels to ensure
stable deceleration.
The M Dynamic Mode is deactivated each time
the engine is started.
Brake assistant
With the M Dynamic Mode activated, sta-
bilizing interventions are only carried out
to a reduced degree.<
When you apply the brakes rapidly, this system
automatically produces the maximum braking
force boost and thus helps to achieve the short-
est possible braking distance during full brak-
ing. This system exploits all of the benefits pro-
vided by ABS.
To maintain vehicle stability, drive with
DSC activated and the M Dynamic Mode
deactivated whenever possible.<
Do not reduce the pressure on the brake pedal
for the duration of the full braking.
Indicator lamp
The indicator lamp goes out shortly
after the engine is started. The indica-
tor lamp lights up continuously:
DSC Dynamic Stability Control
DSC optimizes the vehicle stability and traction.
It also detects unstable driving states such as
understeering and oversteering, and helps
keep the vehicle on course within the physical
limits by reducing the engine output and by
braking at the wheels.
M Dynamic Mode is activated.
The indicator lamp lights up continuously and
the DSC indicator lamp flashes: the M Dynamic
Mode is active and controls the drive and brak-
ing forces.
Activating MDM
The DSC is operational every time you start the
engine.
You activate the M Dynamic Mode with the
button on the steering wheel, refer to MDrive on
page 53.
The laws of physics cannot be repealed,
even with DSC. An appropriate driving
style always remains the responsibility of the
driver. Do not reduce the additional safety mar-
gin of the system by taking risks.<
With the ignition switched on you can change
the settings of MDrive on the Control Display.
iDrive, for operating principle refer to page 16.
1.
Press the
This opens the start menu.
button.
Indicator lamp
The indicator lamp goes out shortly
after the engine is started.
The indicator lamp flashes: DSC is con-
trolling the drive forces and brake forces.
The indicator lamp lights up continuously: DSC
is deactivated.
2.
3.
4.
Press the controller to open the menu.
Select "MDrive" and press the controller.
Select "DSC" and press the controller.
M Dynamic Mode MDM
The M Dynamic Mode is a mode of the DSC
Dynamic Stability Control. It enables driving
with greater longitudinal and lateral accelera-
tion on dry road surfaces, however with limited
vehicle stability. The system does not provide
stabilizing intervention by reducing the engine
output and braking at the wheels until the abso-
83
Online Edition for Part no. 01 41 0 014 244 - © 08/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64, BMW M6 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)