Adjusting air distribution individually –
individual program
Switching cooling function on and off
The cooling function cools and
dehumidifies the incoming air
Your settings are stored in this program.
before reheating it as needed
iDrive, for operating principle refer to page 16.
according to the temperature setting. This
function is only available when the engine is
running.
1.
2.
3.
Open the start menu.
Open "Climate".
Select "Vent settings" and press the con-
troller.
The driver's and front passenger side can
be adjusted separately with the fields on the
right or left side.
The cooling function helps to avoid condensa-
tion on the window surfaces or to quickly
remove them.
Depending on the weather, the windshield may
fog over briefly when the engine is started.
4.
Select the driver's or front passenger side if
necessary.
Move the controller to the right or left
repeatedly until the driver's side or front
passenger side is selected.
The cooling function is switched on automati-
cally with the AUTO program.
Maximum cooling
Maximally cooled air is obtained as
quickly as possible at an outside
temperature above approx. 327/
5.
6.
Select the desired field by moving the con-
troller.
Turn the controller to adjust the air distribu-
tion.
0
6 and with the engine running.
At the lowest temperature, the automatic cli-
mate control switches into recirculating air
mode. The maximum air volume flows out of the
vents for the upper body. It is therefore neces-
sary for these vents to be open for maximum
cooling.
AUC Automatic recirculated-air
control/recirculated-air mode
You can respond to unpleasant
odors or pollutants in the immedi-
ate environment by temporarily
suspending the supply of outside air. The sys-
tem then recirculates the air currently within the
vehicle. In AUC mode, a sensor detects pollut-
ants in the outside air and controls the shut-off
automatically.
Driver's side:
1
Air directed toward the windshield and side
windows
2
3
Air for the upper body
Air to footwell
Front passenger side:
Press the button repeatedly to run through the
following control sequence:
4
5
Air for the upper body
Air to footwell
>
LED off: outside air flows into the vehicle
continuously.
Pressing the AUTO button cancels the
manual air distribution settings.<
>
Right LED on, AUC mode: the system
detects pollutants in the outside air and
responds by blocking the supply of outside
air when required.
The automatic mode for the air volume remains
effective with manual air distribution.
111
Online Edition for Part no. 01 41 0 014 242 - © 08/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2008 BMW 6-Series 650i E63 E64 Owners Manual 4.0 out of 4.0 based on 1 product reviews. wonderful site to enjoy keep me informed thanks.