Displaying the urgency of malfunctions
Speed limit
You can enter a speed and a Check Control
message indicates when you have reached
this speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph/5 km/h.
Displaying, setting or changing limit
Depending on the equipment, the stored Check
Control messages are also displayed with the
following symbols:
iDrive, for operating principle refer to page 16.
1.
2.
Open the start menu.
No malfunctions detected in the moni-
tored systems.
Open "Navigation".
Without navigation system*: open "Car
Malfunctions detected in the monitored
systems. Depending on the malfunction,
supplementary information is shown on
the Control Display.
Data".
3.
4.
Select "Car Data" and press the controller.
Select "Limit" and press the controller.
The symbols also indicate the status of the ser-
vice requirements display, refer to page 77.
Displays after completion of trip
Malfunction reports generated during the trip
are shown consecutively when you switch off
the ignition.
Before the display disappears, you can display
the messages once again. Press the CHECK
button for approx. 2 seconds. If several mes-
sages are present, you can press the CHECK
button repeatedly.
5.
6.
Select the speed value and press the con-
troller.
Turn the controller to set the limit. If neces-
sary, hold it against a slight resistance to
enter a greater difference.
The display:
>
>
turns off automatically after a brief period
7.
Press the controller to apply the setting.
The limit is automatically switched on.
can be turned off at any time by pressing
the CHECK button again for approx. 2 sec-
onds
Applying your current speed as limit
Select "Select current speed" and press the
controller. The system applies your current
speed as the limit.
Activating limit
Select "On" and press the controller.
The limit is automatically switched on.
81
Online Edition for Part no. 01 41 0 014 242 - © 08/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2008 BMW 6-Series 650i E63 E64 Owners Manual 4.0 out of 4.0 based on 1 product reviews. wonderful site to enjoy keep me informed thanks.