Engine oil
6.
Change to the second field from the top if
necessary. Turn the controller until "Engine
oil level" is selected and press the control-
ler. The oil level is displayed.
Engine oil consumption depends on driving
style and driving conditions.
Checking engine oil level
Possible messages
Your vehicle is equipped with an electronic oil
level check.
>
>
"Engine oil level O.K."
"No measurement available: Updating
engine oil level measurement...":
Engine oil level is being measured. This
process can take approx. 1 minute when
stopped on a level surface with the engine
running and approx. 5 minutes while driv-
ing.
The condition for the most accurate indication
of the oil level possible is measurement with the
engine at operating temperature, i.e. following
an uninterrupted drive of at least 6 miles/10 km.
You can display the oil level on the Control Dis-
play while driving or when stopped on a level
surface with the engine running.
If the engine oil has been topped off, the
measurement of the oil level can take up to
iDrive, for operating principle refer to page 16.
30
minutes.
1.
Press the
button.
This opens the start menu.
>
"Oil level at the minimum! Refill with 1 quart
of engine oil.":
Add a maximum of 1 US quart/1 liter of
engine oil at the next opportunity, refer to
Adding engine oil below. Add at least
2.
3.
Press the controller to open the menu.
Turn the controller until "Info sources" is
selected and press the controller.
0.5
US quart/0.5 liter. Otherwise the oil
level control may not display the new value
correctly.
If the oil level displayed is below minimum,
add engine oil immediately. Failure to do so
may lead to engine damage.
>
>
"Engine oil level too high":
Have the vehicle checked immedi-
ately; otherwise, engine damage may
result if too much oil has been added.<
4.
5.
Turn the controller until "Service" is
selected and press the controller.
"Please observe recalculated service inter-
val for engine oil":
Change to upper field if necessary. Turn the
controller until "Service requirements" is
selected and press the controller.
Do not add engine oil. Before continuing to
drive, note the recalculated remaining mile-
age until the next oil change service, refer to
Service requirements on page 77. Have the
system checked as soon as possible.
218
Online Edition for Part no. 01 41 0 014 242 - © 08/07 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2008 BMW 6-Series 650i E63 E64 Owners Manual 4.0 out of 4.0 based on 1 product reviews. wonderful site to enjoy keep me informed thanks.