5
VEHICLE MAINTENANCE REQUIREMENTS
10
F070E05A-AAT
o Automatic Transaxle Fluid
F070G02A-AAT
o Brake Fluid & Clutch Fluid
F070J01A-AAT
o Brake Pads, Calipers and Ro-
tors
The fluid level should be in the "HOT"
range of the dipstick, after the engine
and transaxle are at normal operating
temperature. Check the automatic
transaxle fluid level with the engine
running and the transaxle in neutral,
with the parking brake properly ap-
plied. Use Hyundai Genuine ATF SP-
III, DIAMOND ATF SP-III, SK ATF
SP-III or other brands appraoved by
Hyundai Motor Co., when adding or
changing fluid.
Check brake fluid level in the brake
fluid reservoir. The level should be
between "MIN" and "MAX" marks on
the side of the reservoir. Use only
hydraulic brake fluid conforming to DOT
3 or DOT 4.
Check the pads for excessive wear,
discs for run out and wear, and cali-
pers for fluid leakage.
F070K01A-AAT
o Exhaust Pipe and Muffler
F070H01A-AAT
o Rear Brake Drums/Linings,
Parking Brake
Visually inspect the exhaust pipes,
muffler and hangers for cracks, dete-
rioration, or damage. Start the engine
and listen carefully for any exhaust
gas leakage. Tighten connections or
replace parts as necessary.
Check the rear brake drums and lin-
ings for scoring, burning, leaking fluid,
broken parts, and excessive wear. In-
spect the parking brake system in-
cluding the parking brake lever and
cables. For detailed service proce-
dures, refer to the Shop Manual.
F070F01A-AAT
o Brake Hoses and Lines
Visually check for proper installation,
chafing, cracks, deterioration and any
leakage. Replace any deteriorated or
damaged parts immediately.
F070L01A-AAT
o Suspension Mounting Bolts
Check the suspension connections for
looseness or damage. Retighten to the
specified torque.
| Categories | Hyundai Manuals, Hyundai Coupe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Coupe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)