2008 Hyundai Coupe Owners Manual

DO-IT-YOURSELFMAINTENANCE
6
REPLACEMENT OF  LIGHT
BULBS
27
G290B02GK-GAT
Adjustment After Headlight As-
sembly Replacement
SPECIFICATION:
"H"
Horizontal  center  line  of  headlights
from ground:
Low Beam: 690 mm (27.2 in.)
High Beam: 674 mm (26.5 in.)
G260A01MC-AAT
Before  attempting to  replace  a light
bulb, be  sure the switch  is turned to
the "OFF" position.
The  next  paragraph  shows  how  to
reach   the light bulbs so they may be
changed.Besuretoreplacetheburned-
out bulb with one of the same number
and wattage rating.
Vertical line
30mm
(1.18 in.)
Horizontal line
W
"P"
H
"W"
Distance between each headlight cen-
ter :
Low Beam: 1,336 mm (52.6 in.)
High Beam: 1,098 mm (43.2 in.)
See page 6-36 for the wattage descrip-
tions.
Cut-off line
L
Ground
line
H
!
"L"
G290B01HR-1
CAUTION:
Distance between the headlights and
the  wall  that   the  lights  are  tested
against :  3,000 mm (118  in.)
o  Keep the  lamps  out  of contact
with petroleum products, such as
oil, gasoline, etc.
o  If you don't have necessary tools,
the correct bulbs and the exper-
tise,   consult   your  authorized
Hyundai dealer.
If the vehicle has had front body repair
and the headlight assembly has been
replaced, the headlight aiming should
be checked using an aiming screen as
shown in the  illustration. Turn on the
headlight switch.
1.
Adjust headlights so that main axis
of light  is parallel to  center line  of
the body  and is aligned with  point
"P" shown  in the illustration.
2.
Dotted lines in the illustration show
the center  of headlights.
Product Specification
Categories Hyundai Manuals, Hyundai Coupe Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 407 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Coupe
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field