3
IN CASE OF EMERGENCY
10
D060H02A-EAT
7. Reinstall Wheel Nuts
D060I01E-EAT
8. Lower Vehicle and Tighten
Nuts
OGK036603
!
OGK036604
WARNING:
To reinstall the wheel hold it on the
studs put the wheel nuts on the studs
and tighten them finger tight. The nuts
should be installed with their small
diameter ends directed inward. Jiggle
the tyre to be sure it is completely
seated, then tighten the nuts as much
as possible with your fingers again.
HGK4014
Wheels and wheel cover may have
sharp edges. Handle them carefully
to avoid possible severe injury.
Before putting the wheel into place,
be sure that there is nothing on the
hub or wheel (such as mud, tar,
gravel, etc.) that interferes with the
wheel from fitting solidly against
the hub. If there is, remove it. If
there is not good contact on the
mounting surface between the
wheelandhub,thewheelnutscould
come loose and cause the loss of a
wheel.Lossofawheelmayresultin
loss of control of the vehicle. This
may cause serious injury or death.
Lowerthecartothegroundbyinserting
the wheel nut wrench into the wrench
bar and turning the wheel nut wrench
counterclockwise.
Then position the wrench as shown in
thedrawingandtightenthewheelnuts.
Be sure the socket is seated com-
pletelyoverthenut.Donotstandonthe
wrench or use an extension pipe over
thewrenchhandle.
Product Specification
Categories | Hyundai Manuals, Hyundai Coupe Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Coupe |
Document File Type | |
Copyright | Attribution Non-commercial |