2 DRIVINGYOURHYUNDAI
POWER ADJUSTABLE PEDALS
ANTI-LOCKBRAKESYSTEM(ABS)
12
C100A01NF-AAT
(WithAutomaticTransaxle)(IfInstalled)
Setting the driver's position
C120A01FC-AAT
The Anti-Lock Brake System (ABS) is designed
to prevent wheel lock-up during sudden braking
or on hazardous road surfaces. The ABS con-
trol module monitors the wheel speed and con-
trols the pressure applied to each brake. Thus,
in emergency situations or on slick roads, ABS
will increase vehicle control during braking.
1)
2)
Be sure the parking brake is engaged.
Move the accelerator and brake pedals to
the front most position by pushing the "
portion of the switch.
"
3)
4)
Adjust the seat position and the steering
wheel angle properly.
Move the pedals toward you until you can
fully depress the brake pedal by pushing the
NOTE:
"
Depress the pedals a few times to get used
to the feel after adjusting.
" portion of the switch.
o
A click sound may be heard in the engine
compartment when the vehicle begins
to move after the engine is started. These
conditions are normal and indicate that
the anti-lock brake system (Electronic
Stability Control) is functioning prop-
erly.
During ABS (ESC) operation, a pulsation
may be felt in the brake pedal when the
brakes are applied. Also, a noise may be
heard in the engine compartment while
braking. These conditions are normal
and indicate that the anti-lock brake
system (Electronic Stability Control Sys-
tem) is functioning properly.
5)
!
WARNING:
HNF2115-A
o
o
o
Adjust the pedals after parking the ve-
hicle on level ground. Never attempt to
adjust the pedals while the vehicle is
moving.
Never adjust the pedals with your foot
on the accelerator pedal as this may
result in increasing the engine speed
and acceleration.
Make sure that you can fully depress the
brake pedal before driving. Otherwise,
you may not be able to hold down the
brake pedal firmly in an emergency stop.
To adjust the position of the accelerator and
brake pedals, turn the ignition key to the "ON"
positionwiththeselectorleverinthe"P"position
and push the switch.
o
If you push the " " portion of the switch, the
pedals move rearward.
If you push the " " portion of the switch, the
pedals move forward.
| Categories | Hyundai Manuals, Hyundai Sonata Manuals |
|---|---|
| Tags | Hyundai Sonata 2.4, Hyundai Sonata 3.3 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Sonata |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2008 Hyundai Sonata Owners Manual 4.0 out of 4.0 based on 1 product reviews. 3.3 L 6-Cylinder, V-type DOHC