6 DO-IT-YOURSELFMAINTENANCE
22
CHECKING AND REPLACING
FUSES
Drive belts should be checked periodically for
proper tension. At the same time, belts should
be examined for cracks, wear, fraying or other
evidence of deterioration and replaced if neces-
sary.
G200A01A-AAT
Replacing a Fusible Link
!
CAUTION:
When replacing a fusible link, never use
anything but a new fusible link with the
same or lower amperage rating. Never use
a piece of wire or a higher-rated fusible link.
This could result in serious damage and
create a fire hazard.
When a new belt is replaced, the belt should be
located within the pulley of flat idler.
Belt routing should also be checked to be sure
there is no interference between the belts and
other parts of the engine.
NOTE:
Drive belt tension is adjusted automatically
by the auto tensioner.
HNF4004
Afusiblelinkwillmeltiftheelectricalcircuitsfrom
the battery are ever overloaded, thus prevent-
ing damage to the entire wiring harness. (This
could be caused by a short in the system
drawing too much current.) If this ever happens,
have a Hyundai dealer determine the cause,
repair the system and replace the fusible link.
The fusible links are located in a relay box in the
engine compartment for easy inspection.
| Categories | Hyundai Manuals, Hyundai Sonata Manuals |
|---|---|
| Tags | Hyundai Sonata 2.4, Hyundai Sonata 3.3 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Sonata |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2008 Hyundai Sonata Owners Manual 4.0 out of 4.0 based on 1 product reviews. 3.3 L 6-Cylinder, V-type DOHC