1FEATURESOFYOURHYUNDAI
84
Standard Programming
Rolling Code Programming
NOTE:
There are 30 seconds in which to initiate
step3.
To train most devices, follow these instructions:
Rolling code devices which are "code-pro-
tected" and manufactured after 1996 may be
determined by the following:
1.
For first-time programming, press and hold
thetwooutsidebuttons,HomeLink
and Channel 3 Buttons, until the indicator
®
Channel
3.
Return to the vehicle and firmly press, hold
for two seconds and then release the de-
1
o
Reference the device owner's manual for
verification.
light begins to flash (after 20 seconds).
Release both buttons. Do not hold the but-
tons for longer than 30 seconds.
Position the end of your hand-held transmit-
ter 1-3 inches (2-8 cm) away from the
®
HomeLink buttonswhilekeepingtheindica-
tor light in view.
sired HomeLink button. Repeat the "press/
®
o
The handheld transmitter appears to pro-
gram the HomeLink Universal Transceiver
but does not activate the device.
Press and hold the trained HomeLink button.
The device has the rolling code feature if the
indicator light flashes rapidly and then turns
solid after 2 seconds.
hold/release" sequence a second time to
complete the programming. (Some devices
may require you to repeat this sequence a
third time to complete the programming.)
Press and hold the just-trained HomeLink
®
button and observe the red Status Indicator
LED.Iftheindicatorlightstaysonconstantly,
programming is complete and your device
should activate.
2.
3.
4.
o
4.
5.
Simultaneously press and hold both the
HomeLink
®
and hand-held transmitter but-
ton. DO NOT release the buttons until step
has been completed.
To train rolling code devices, follow these in-
structions:
4
To program the remaining two HomeLink
®
While continuing to hold the buttons the red
Indicator Status LED will flash slowly and
then rapidly after HomeLink successfully
®
trains to the frequency signal from the hand-
held transmitter. Release both buttons.
1. At the garage door opener receiver (motor-
head unit) in the garage, locate the "learn" or
"smart" button. This can usually be found
where the hanging antenna wire is attached
to the motor-head unit. Exact location and
color of the button may vary by garage door
opener brand. If there is difficulty locating the
training button, reference the device owner's
manual or please visit our Web site at
www.homelink.com.
buttons, follow either steps 1 through 4
above for other Rolling Code devices or
steps 2 through 5 in Standard Programming
for standard devices.
5.
6.
Press and hold the just-trained HomeLink
®
button and observe the red Status Indicator
LED.Iftheindicatorlightstaysonconstantly,
programming is complete and your device
Gate Operator & Canadian Programming
During programming, your handheld transmit-
ter may automatically stop transmitting. Con-
tinue to press the Integrated HomeLink Wire-
®
lessControlSystembutton(notesteps2through
4 in the Standard Programming portion of this
document) while you press and re-press
should activate when the HomeLink
is pressed and released.
®
button
2. Firmly press and release the "learn" or
"smart" button (which activates the "training
light").
To program the remaining two HomeLink
buttons, follow steps 2 through 5.
®
("cycle")
your handheld transmitter every two
seconds until the frequency signal has been
learned. The indicator light will flash slowly and
| Categories | Hyundai Manuals, Hyundai Sonata Manuals |
|---|---|
| Tags | Hyundai Sonata 2.4, Hyundai Sonata 3.3 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Sonata |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2008 Hyundai Sonata Owners Manual 4.0 out of 4.0 based on 1 product reviews. 3.3 L 6-Cylinder, V-type DOHC