DO-IT-YOURSELFMAINTENANCE 6
7
The engine oil and filter should be changed at
those intervals specified in the maintenance
schedule in Section 5. If the car is being driven
in severe conditions, more frequent oil and filter
changes are required.
(2.4L)
The procedure for changing the oil and filter is
as follows:
1.
Park the car on level ground and set the
parking brake. Start the engine and let it
warm up until the needle on the coolant
temperature gauge moves above the lowest
mark. Turn the engine off and place the gear
selector lever in "P" (automatic) or reverse
gear (manual transaxle).
HNF5005-1
HNF5006-1
3. Slide underneath the car and loosen the
drain plug by turning it counterclockwise with
a wrench of the proper size. Be sure that a
drain pan is in position to catch the oil as it
drains out, then remove the drain plug.
(3.3L)
2
. Open the hood and remove the engine oil
filler cap.
NOTE:
Loosen the oil filter cap by turning it coun-
terclockwise to drain well the oil in the oil
filter (3.3L only).
!
WARNING:
Be very careful when draining the engine oil
as it may be hot enough to burn you!
4.
When the oil has stopped draining, replace
the drain plug using a new gasket and re-
tighten by turning it clockwise.
G040B01NF
Oil pan drain plug tightening torque:
25.3
~ 32.5 lb.ft (3.5 ~ 4.5 kgf.m)
| Categories | Hyundai Manuals, Hyundai Sonata Manuals |
|---|---|
| Tags | Hyundai Sonata 2.4, Hyundai Sonata 3.3 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Sonata |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2008 Hyundai Sonata Owners Manual 4.0 out of 4.0 based on 1 product reviews. 3.3 L 6-Cylinder, V-type DOHC