Driving your vehicle
CAUTION - Windshield
heating
Do not use the
or
position
during
cooling
operation in
extremely humid weather. The dif-
ference between the temperature of
the outside air and that of the wind-
shield could cause the outer sur-
face of the windshield to fog up,
causing loss of visibility. In this
case, set the mode selection knob
to the
position and fan speed
OMG045057N
OMG045058N
control knob to the lower speed.
Automatic climate control system
To defog inside windshield
To defrost outside windshield
Set fan speed to the highest (extreme
right) position.
Set temperature to the extreme hot
(HI) position.
).
1.
•
For maximum defrosting, set the tem-
perature control to the extreme highest
temperature setting and the fan speed
control to the highest speed.
• If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.
Before driving, clear all snow and ice
from the windshield, rear window, out-
side rear view mirrors, and all side win-
dows.
1.
2.
3.
Select desired temperature.
Press the defrost button (
2.
).
The outside (fresh) air position will be
selected automatically.
If the outside (fresh) air position and
higher fan speed are not selected auto-
matically, adjust the corresponding but-
ton or knob manually.
3.
4.
Press the defrost button (
The outside (fresh) air position will be
selected automatically.
•
•
Clear all snow and ice from the hood
and air inlet in the cowl grill to improve
heater and defroster efficiency and to
reduce the probability of fogging up
inside of the windshield.
4
64
| Categories | Kia Magentis Manuals, Kia Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)