Maintenance
Remove the valve cap from the tire Tire rotation
Without a spare tire
valve stem. Press the tire gage firm-
To equalize tread wear, it is recom-
ly onto the valve to get a pressure
measurement. If the cold tire inflation
pressure matches the recommended
pressure on the tire and loading
information label, no further adjust-
ment is necessary. If the pressure is
mended that the tires be rotated
every 12,000 km (7,500 miles) or
sooner if irregular wear develops.
CBGQ0707
During rotation, check the tires for
correct balance.
low, add air until you reach the rec- When rotating tires, check for uneven
Directional tires (if equipped)
ommended amount.
wear and damage. Abnormal wear is
usually caused by incorrect tire pres-
sure, improper wheel alignment, out-
of-balance wheels, severe braking or
severe cornering. Look for bumps or
bulges in the tread or side of tire.
Replace the tire if you find either of
these conditions. Replace the tire if
fabric or cord is visible. After rotation,
be sure to bring the front and rear tire
pressures to specification and check
lug nut tightness.
If you overfill the tire, release air by
pushing on the metal stem in the
center of the tire valve. Recheck the
tire pressure with the tire gage. Be
sure to put the valve caps back on
the valve stems. They help prevent
leaks by keeping out dirt and mois-
ture.
CBGQ0707A
Disc brake pads should be inspected
for wear whenever tires are rotated.
Rotate radial tires that have an
asymmetric tread pattern only
from front to rear and not from
right to left.
WARNING
Refer to Section 8, Specifications.
• Do not use the temporary
spare tire for tire rotation
•
Do not mix bias ply and radial
ply tires under any circum-
stances. This
may
cause
unusual handling characteris-
tics that could result in death,
severe injury, or property
damage.
7
26
Product Specification
Categories | Kia Magentis Manuals, Kia Manuals |
---|---|
Model Year | 2008 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |